IVIEW iVIEW-103DV, Руководство пользователя

Страница: 10 / 10

7.
Please consult the following section when you encounter problems using this DVD player. If
the player ceases to function properly after some wrong settings, you may restore the factory
defaults as described in Section 8.5.1 on the previous page. In all cases, for your safety, never
attempt to open the unit by yourself given the presence of dangerous voltage inside. Only the
technicians of the after-sale service are authorized to open and repair it.
NO PICTURE AND NO SOUND
- Press the Standby button to turn on the player.
- Check the power outlet and make sure that the plug is firmly inserted.
- Ensure the power cord is not damaged.
THERE IS SOUND BUT NO PICTURE
- Make sure you have connected the audio cable to the audio input (instead of an audio output)
on your television.
- Check if the sound is cut or reduced to minimum.
THERE IS PICTURE BUT NO SOUND
- You should set the video mode on your television to be YUV or AV-IN (Audio/Video Input).
DISTORTED OR BLACK AND WHITE PICTURE
- Choose the video mode (NTSC or PAL) by pressing the N/P button on the remote control. You
can change the default value of this setting in the player’s video menu.
CHOPPING SOUND OR IMAGE DURING PLAYBACK
- Check if the disc is not scratched or damaged. Try another disc.
- Make sure the YUV and the Audio/Video cables are connected firmly and correctly.
DISPLAY OF MESSAGE “NO DISC” OR “BAD DISC”
- Make sure you insert the disc on the correct side.
- Check if the disc is not scratched or damaged. Try another disc.
- Make sure that the disc format is supported by this player.
- The message may also appear in case of overheating. In this case, turn the unit off for
approximately an hour. Also leave sufficient ventilation space around the unit, as described at
the beginning of this manual.
REMOTE CONTROL PROBLEM
- Check battery status. If necessary, replace by two new AAA batteries.
- Make sure batteries are inserted by following the +/- polarity signs.
- Remove all the objects between the front of the DVD player and remote control.
MALFUNCTION
- Turn off the player then turn it on again. If necessary, disconnect it from the wall outlet.
THE DISC IS STUCK IN THE DISC TRAY
- Turn off the player. Then turn it on and immediately press the OPEN/CLOSE button on the
remote control.
120V ~ 60Hz
/MPEG4
8.