Iveco Stralis MY 2016, Инструкция для тренажера

Страница: 84 / 254

58
NEW STRALIS MY2016
‒
GUIDELINES FOR BODYBUILDERS
CHASSIS INTERVENTIONS
2.22
RAIN FLAP
–
Printed 692.68.697
–
5 Ed. - Base 03/2019
In this figure, the dimensions refer to tyres 315/80 R 22.5; with the measurement 385/65 R 22.5 the dimensions in section A-A
must be increased by 50 mm.
116725
Figure 31
2.22 RAIN FLAP
Once outfitting is complete, the mudflaps must be included in the vehicle equipment if and as indicated by the regulations in force.
2.23 SIDE PROTECTIONS
In some countries, regulations (national or EC) require the application of side protections. Compliance with the required character-
istics should be assured by the Bodybuilder who handles completion of the vehicle, if it was not already equipped as such originally
(optional setting).
In permanently applied superstructures (e.g. fixed bodies, vans) side protection can be applied on the basis of their structure (e.g.
backbone of the floor beams), while for mobile superstructures (e.g. tippers, interchangeable equipment, hook lifts) the connection
can be made by means of suitable supports on the counter chassis or directly on the chassis. In the latter case, use the existing holes
on the vertical rib of the side member as much as possible, in compliance with Chapter 2.2 (
➠
Page 7).
In implementing the outer protection, as required by the regulations (e.g. EC Directive), it is permitted to use either a single section
with a surface extending in the vertical longitudinal sections, with pre-set dimensions and distances between them.
The protection must be connected to the support structures in order to be quickly removed or reversed in case of maintenance
or repair of the units behind them
Special attention should be paid to ensure the distances established by the Regulations in relation to the various parts of the vehicle.
Figure 32 shows:
●
a side protection solution in case of a fixed body, made in compliance with the relevant EC Directives,
●
an example of a support for fixing the combined lateral protection and the mudguard for the rear wheels, suitable for mobile
superstructures.