IVC Displays NP-800S, Руководство пользователя

Страница: 16 / 30

16
2.3.5 Dip Switch
Pin3,4 unused
Touch Screen Calibrate mode: In this mode when you power on the NP-800S, the
screen will display a “+” sign at the
center of the screen. Use a stylus or
finger to push the center of the “+”
until it moves. The “+” moves to
upper-left, lower-left, lower-right and
upper-right corners. When all five “+”
are done the “+” will disappear. The
Touch Screen parameter will store at
Flash Rom.
Boot Loader mode: Load new Windows CE image file.
If the NP-800S already load the CE image with boot loader. Set the DIP SW2 ON
then power ON into boot loader mode. Refer the load Win CE image document.
Pin1 Pin2 Mode
OFF OFF Normal
ON OFF Touch Screen Calibrate mode
OFF ON Boot Loader mode