IVC Displays NP-5**A Series Скачать руководство пользователя страница 84

Страница: 84 / 93

NP-5xxxA SERIES User Manual

6. “Touch this screen to start its calibration” appears on one of the screens. Touch the

screen.

7. “Touch the red square” messages appear. Touch the red squares in sequence.

8. Continue calibration for each monitor by clicking Standard Calibration and touching

the red squares.

NOTES: 1. If you use a single VGA output for multiple monitors, please do not use the

Multiple Monitor function. Just follow the regular procedure for calibration on each
of your desktop monitors.

2. The Rotating function is disabled if you use the Multiple Monitor function.

3. If you change the resolution of display or screen address, you have to redo Map
Touch Screens, so the system understands where the displays are.

About

This panel displays information about the PenMount controller and this driver version.

PenMount Monitor Menu Icon

The PenMount monitor icon (PM) appears in the menu bar of Windows 2000/XP system when you

turn on PenMount Monitor in PenMount Utilities.

Содержание NP-5**A Series






























































































Результаты поиска

Содержание NP-5**A Series

Отзывы:

IVC Displays NP-5**A Series, Руководство пользователя, Страница: 84 / 93

Результаты поиска

Содержание NP-5**A Series

Отзывы: