- Place object on center of weighing platform. Wait until numbers stabilize to
record proper weight reading.
- To turn scale off, press and hold On/Off Button (#7) for two seconds. Display will
return to clock mode.
Tare Function:
- When using a container, plate, etc. to weigh another object, place the empty
container/plate on scale first. Display will show weight of empty container/plate.
- Press Tare Button(#5) to bring the weight reading to “0”, so that you may get an
accurate reading of the object(s) you will place within the container/plate:
• If the container/plate is lighter than 100g, the display will simply reset to “0”.
• If the container/plate is heavier that 100g, the display will reset to “0” and
show the “>T<” symbol on the bottom left.
- Proceed to place the object(s) you are weighing into the container/plate.
- The weight reading will now be accurate.
Using the Timer:
- Press and hold Timer Button (#4) for two seconds until display reads “00:00”.
- The leftmost “0” digit will flash. Pressing the Plus Button (#8) will increase the
flashing number.
- Once you have reached your desired number, press the Timer Button (#4) to
move to the next digit, then press the Plus Button (#8) to increase the number.
- Continue along until you have set the number of hours and minutes you wish to
time. Press the Timer Button (#4) once more to start the countdown.
- The timer will beep when it reaches “00:00”. Press the Timer Button (#4) to stop
the alarm.
Setting the Clock:
- Press and hold the Time Button (#6) for two seconds until the hour digits flash.
- Press the Plus Button (#8) to increase the flashing number.
- Once you’ve reached the correct hour, press the Time Button (#6) to move to the
minutes digits.
- Press the Plus Button (#8) to increase the flashing number.
- Once you’ve reached the correct minute, press the Time Button (#6) to confirm.
Selecting the Temperature Unit:
- Ensure that the scale is in clock mode. If it is in scale mode, press and hold the
On/Off Button (#7) for two seconds until the current time is displayed.
- Press the Unit Button (#3) to switch between Celsius and Fahrenheit
temperature units.
4
