CONNECTING ATTACHMENTS
1. Locate the prominent points on the desired attachment.
2. Align the points with the corresponding holes on the spray gun (13).
3. Press the parts firmly together to attach.
POWERING ON THE UNIT
This pressure washer can be powered through either a direct current or the internal battery.
Direct current:
1. Connect the power cord (11) to your vehicle’s power port.
2. Press the power button (6)
NOTE 1: some vehicles require that ignition be in accessory position.
NOTE 2: disconnect the power cord (11) whenever the vehicle engine is turned off for an extended period of time, as
some vehicles continue charging connected devices even when the engine is off. The vehicle’s battery charge may be
depleted if left connected.
Battery:
1. Press the power button (6) to power on the unit.
Charging the battery:
1. Power off the unit before charging.
2. Connect the wall charger (19) to the charging port (8).
3. The battery indicator (7) will light red while the battery is
charging, and change to green when it reaches full charge.
CONTROLLING THE WATER FLOW
1. To start the water flow, pull the spray gun (13) trigger.
Release the trigger to stop the flow.
2. For a continuous water flow, pull the trigger forward into position 1 or position 2.
4
