Ivation IVASTDDSKBK Скачать руководство пользователя страница 3

Страница: 3 / 5

Installation

1. Place the sit-to-stand desk onto the desired surface. Turn the desk over onto its side.

2. Place one of the discs over the hole as shown in the diagram below.

3. Place a foot over the disk, lining up the holes.

4. Secure the foot into place using the included screws and Allen wrench.

5. Repeat for the other side of the desk

6. Adjust the height of the desk by pushing in the buttons on either side of the desk, then

slide the sides up until they have locked into the desired notch.

Содержание IVASTDDSKBK

Страница 1: ...and Desk This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user Any use that does not conform to the guidelines described in this User Guide may void the limited warranty IVASTDDSKBK office ...

Страница 3: ...n in the diagram below 3 Place a foot over the disk lining up the holes 4 Secure the foot into place using the included screws and Allen wrench 5 Repeat for the other side of the desk 6 Adjust the height of the desk by pushing in the buttons on either side of the desk then slide the sides up until they have locked into the desired notch 2 B G C D 3 ...

Страница 4: ...e monitors Keep monitor and laptop base fully on the worksurface Allowing any part of base or stand to hang off the edge may result in property damage and or personal injury Raise worksurface slowly Raising worksurface too fast may create an unstable situation resulting in property damage and or personal injury 4 5 E ...