Ivation IVA-4308PCS, Руководство пользователя

Страница: 9 / 13

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
• Before operating the gardening appliance, put on ANSI-approved safety goggles, hard hat
and other safety gear. Safety goggles and other safety gear are sold separately.
• If an extension cord is used, ensure that it is an outdoor type extension cord
and that it is the correct design to accept this appliance’s plug.
WARNING! TO PREVENT ELECTRIC SHOCK AND SERIOUS PERSONAL INJURY:
The extension cord must remain secured to the appliance’s plug.
Secure the extension cord by either using the knot method explained in the safety warning section,
or by using a device designed specifically for retaining the extension cord (sold separately).
Power Cord Routing
1. Route the power cord away from the work area to prevent it from contacting
with the blade. Plan your route before starting work. Start your work at the
nearest point to the electrical outlet, and work away from it. This will keep the
power cord away from the Pole Saw and avoid it being accidentally cut.
2. Keep the power cord over your shoulder for added safety.
3. For tension relief of the power cord, loop the cord and bring this through the
opening at the handle and insert it into the Cable Hook. See Figure 10, right.
Adjusting Cutting Length
WARNING!
Always release the Trigger and unplug the Pole Saw before
any adjustment.
1. The cutting length of the Pole Saw can be adjusted according to required
cutting height. Unscrew the locking sleeve in clockwise direction and
adjust the pole bar.
2. After adjusting required length, tighten the locking sleeve.
See Figure 11, right.
Activating/Deactivating Pole Saw
1. The Pole Saw is fitted with a lock button feature. To start Pole Saw,
depress the Lock Button then fully press and hold the Trigger. The
Lock Button can now be released. See Figure 12, right.
Note: It is not necessary to maintain pressure on the Lock Button
once the Trigger is squeezed and the motor is running. The Lock
Button is a safety device to avoid accidental start-up of the device.
2. The Pole Saw will automatically stop once the Trigger is released.
The Lock Button will have to be depressed and the switch trigger
squeezed to restart the Pole Saw motor.
Trigger
Lock
Button
Figure 12
Cable
Hook
Figure 11
Locking
Sleeve
Operating Instructions
Figure 10
Cable Lock
9