manualshive.com logo in svg

ivanko IVK 5500, Руководство пользователя

Поделиться
Скачать
ivanko IVK 5500 Скачать руководство пользователя страница 28

STEP 17  Install the Tension Cable (See Diagram 17) 

A.) Thread the bolt on the 161” Tension Cable (#56) into the Single Floating Pulley Bracket (#23) 

previously installed. 

B.) Draw the Cable down to the oblique Pulley on the Main Base Frame. Draw the Cable 

underneath the Pulley then pull upward to the lower Pulley on the Angled Double Floating 
Pulley Bracket (#26) previously installed. 

C.) Draw the Cable around the Pulley then pull downward to the other oblique Pulley on the Main 

Base Frame.  Continue drawing the Cable underneath the Pulley then pull upward to the 
lower Pulley on the Double Floating Pulley Bracket (#27) previously installed. 

D.) Draw the Cable over the Pulley then pull downward to the post on the Main Base Frame. 

Attach the end of the Cable to the Cable Strap Bracket (#45). Secure the Strap to the post 
with one Ø 5/8” x 1 1/8” Chrome Bolt (#110) and Ø 5/8” Chrome Clip (#124). 

E.) Securely tighten all Nuts and Bolts previously installed. 
F.) Check the tightness of the Cable Loop System.  If the cables are too loose, move up the 

lower Pulley on the Double Floating Pulley Bracket (#27).   

 

27 

Содержание IVK 5500



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды