Page 37
Operation and Maintenance
Envistar Top 04-21
DSET.220501.07.en
Continuous product development may give rise to specification changes without notice.
Filter data
For filter data, refer to
. Actual filters are shown in Technical data (see the page
Material specification) and Spare part list under order unique documentation at
Filter replacement
WARNING!
Risk of serious personal injury and/or damage to air handling
unit.
Read and understand the entire chapter "1.5 General safety
messages" before working on, servicing, or inspecting the air
handling unit.
1. Shut down the unit via the service switch in the control equipment, safety switch in
the 0 position.
2. Wait until the fans have stopped, then open the inspection door.
3. Release the eccentric rails.
4. Remove the old filter by pulling it towards you. Discarded filters should be disposed
of correctly. The carbon filters are combustible in their entirety.
5. Clean the filter cabinets.
6. Install the new filter, press in the eccentric rails to engage them and close the in-
spection door.
7. Reset the FLC filter control function via the Climatix display, refer to separate Cli-
matix control documentation. (Only applicable to the Home Concept version of the
unit equipped with carbon filter and integrated control equipment (code MX).
8. Start the unit.
00030
Example eccentric rails
