ITW LOVESHAW LITTLE DAVID LD7D, Руководство пользователя

Страница: 17 / 42

LOVESHAW an ITW Company
LOADING TAPE:
TOP TAPE:
1. RETRACT DETENT WITH RIGHT HAND.
2. WITH LEFT HAND, GRAB CARTRIDGE NEAR TAPE CORE AND ROTATE UP/BACK UNTIL
CARTRIDGE RESTS AGAINST STOP.
3. LOAD TAPE ON TAPE CORE
4. FOLD TAPE ON ITSELF TO PREVENT ADHESIVE FROM GRABBING CARTRIDGE
(ABOUT 1 FT. IN LENGTH).
5. THREAD AS PER DIAGRAM.
6. ROTATE REAR ROLLER ARM TO EXPOSE KNIFE.
7. PULL EXCESS TAPE ACROSS KNIFE TO CUT OFF FOLDED TAPE.
8. RELEASE REAR ROLLER ARM.
9. GRAB TAPE ROLL WITH LEFT HAND AND ROTATE CARTRIDGE UNTIL IT CONTACTS
DETENT. MAINTAIN GRIP OF TAPE ROLL WITH LEFT HAND WHILE RETRACTING
DETENT WITH RIGHT HAND. LOWER CARTRIDGE INTO PLACE AND RELEASE DETENT.
BOTTOM TAPE:
1. GRAB REAR ROLLERS.
2. GRAB FRONT SHAFT OF CARTRIDGE.
3. RAISE REAR OF CARTRIDGE AND MOVE CARTRIDGE UP AND OUT OF MACHINE.
4. THREADING IS THE SAME AS TOP CARTRIDGE.
5. GRABBING THE CARTRIDGE BY REAR ROLLER AND FRONT SHAFT, ANGLE FRONT OF
CARTRIDGE ONTO MOUNTING BOLTS AND THEN LOWER REAR OF CARTRIDGE.