19-6422-M-01 Rev 1
4
1.3 Performance
The 6422e Blower will reduce a static charge of ±1,000V down to
100V in approximately four seconds at a distance of 1 ft. (30.48
cm)
1
. See Table 1 for typical discharge times as determined by
distance. Distance is measured from the front center of the Blower.
Ionization balance is better than ±20V at 1 ft. (30.48 cm).
Table 1. Performance
* Testing was performed with a charge plate monitor in accordance
with ionization standard ANSI/ESD STM3.1-2000 of the ESD
Association.
Four-second discharge at one foot distance is when operating Blower with AC
power. Discharge time at one foot when operating Blower with DC power is five
seconds.
Distance
Discharge Time
1 ft (30.48 cm)
4 seconds
*
2 ft (61 cm)
10 seconds
3 ft (91.44 cm)
19 seconds
Содержание Ion Systems 6422e
