V 06/11
8
General safety regulations
OptiFlex 2 C
Conformity of use
1. The OptiFlex 2 C manual coating equipment is state of the art
equipment that conforms to the recognized technical safety
regulations and is designed for normal powder coating
applications.
2. Any other use is considered non-compliant. The manufacturer
shall not be liable for damage resulting from such use; the user
bears sole responsibility for such actions. ITW Gema GmbH
must be consulted before OptiFlex 2 C manual coating
equipment is used for any other purposes or substances beyond
those indicated here.
3. Observance of the operating, service and maintenance
instructions specified by the manufacturer is also part of
conformity of use. The OptiFlex 2 C manual coating equipment
should only be used, maintained and started up by trained
personnel informed and familiar with the possible hazards
involved.
4. Start-up (i.e. operation of its intended use) is not allowed until it
has been established that the OptiFlex 2 C manual coating
equipment has been installed and wired according to the EU
Machinery Directive (2006/42/EC). EN 60204-1 (machine safety)
must also be observed.
5. Unauthorized modifications to the OptiFlex 2 C manual coating
equipment exempt the manufacturer from any liability from
resulting damage.
6. The relevant accident prevention regulations, as well as other
generally recognized safety regulations, occupational health and
structural regulations are to be observed.
7. Furthermore, the country-specific safety regulations also must be
observed.
Product-specific safety measures
-
Installation work performed by the customer must be carried
out according to local regulations.
-
All components must be grounded according to the local
regulations before start-up.
OptiFlex 2 C Manual coating equipment
The OptiFlex 2 C manual coating equipment is a constituent part of the
equipment and is therefore integrated in the system's safety concept.
If it is to be used in a manner outside the scope of the safety concept,
then corresponding measures must be taken.
Note:
For further security information, see the more detailed ITW Gema
safety regulations!
