ITW Gema GA2, Инструкция по эксплуатации и список запасных частей

Страница: 6 / 51

V 10/04
4
•
General safety regulations OptiGun 2-A(X) (GA02) Automatic powder gun
conformity of use. The OptiGun 2-A(X) (GA02) Automatic powder
gun should only be used, maintained and started up by trained
personnel, who are informed about and are familiar with the
possible hazards involved.
4. Start-up (i.e. the execution of a particular operation) is forbidden
until it has been established that the OptiGun 2-A(X) (GA02)
Automatic powder gun has been set up and wired according to
the guidelines for machinery (98/37 EG). EN 60204-1 (machine
safety) must also be observed.
5. Unauthorized modifications to powder spraying equipment
exempts the manufacturer from any liability from resulting
damage.
6. The relevant accident prevention regulations, as well as other
generally recognized safety regulations, occupational health and
structural regulations are to be observed.
7. Furthermore the country-specific safety regulations must be
observed.
Explosion protection Type of protection Temperature class
0102 II 2 D
IP54 T6 (zone 21)
T4 (zone 22)
Technical safety regulations for stationary
electrostatic powder spraying equipment
General information
The powder spraying equipment from ITW Gema is designed with safety
in mind and is built according to the latest technological specifications.
This equipment can be dangerous if it is not used for its specified
purpose. Consequently it should be noted that there exists a danger to
life and limb of the user or third party, a danger of damage to the
equipment and other machinery belonging to the user and a hazard to
the efficient operation of the equipment.
1. The powder spraying equipment should only be started up and
used once the operating instructions have been carefully studied.
Improper use of the controlling device can lead to accidents,
malfunction or damage to the control itself.
2. Before every start-up check the equipment for operational safety
(regular servicing is essential)!
3. Safety regulations BGI 764 and VDE regulations DIN VDE 0147,
Part 1, must be observed for safe operation.
4. Safety precautions specified by local legislation must be
observed.
5. The plug must be disconnected before the machine is opened for
repair.
6. The plug and socket connection between the powder spraying
equipment and the mains network should only be taken out when
the power is switched off.