15
If current switch-on mode is set to be “double cards are started” or “only card 2 is started”, when the phone has checked
automatically that SIM2 is usable, the following prompts will appear on the display screen in sequence:
6>
“Input PIN of card 2” – if you have started the SIM lock of card 2.
7>
“No service” – indicates failed registration of network for card 2 and you can’t call at the moment.
8>
“Emergency call is allowed” – indicates that card 2 is registered to other network and only 112 can be dialed.
9>
“Search” –card 2 is searching network until proper service network is found.
Note:
Please contact your network operator if you don’t know the PIN1 code of card 1 or card 2.
The default phone password is “1122”.
5.2
Switch off the phone
If you need to switch off your phone, please press the On/Off key until switch-off animation is displayed in the screen. Then
card 1 and card 2 will be closed together. Please don’t switch off your phone by taking down the battery directly, or SIM cards may
be damaged easily and also you may lose some information.
5.3
Shortcut function in standby state
Shortcut icons on the screen from left to right are network service, short message, shortcut, phone book and dial keypad.
5.4
Dial call
Input phone number on screen dial interface. Press Call Key of card 1 and you can dial call through card 1. Press Call
Key of card 2 and you can dial call through card 2. Please press [clear] key or [On/Off] key if you need to end or cancel the dialing.
When the telephone gets through, you can see
Dial call with phone book: enter and search name/phone number stored in phone book. Press Call Key of card 1 and you
can dial call through card 1. Press Call Key of card 2 and you can dial call through card 2.
call timer on the screen.
Redial numbers dialed recently: in standby state, press Call Key of card 1 or card 2 and you can look over 40 numbers or
names you called recently. Scroll to the number or name you need and press Call Key of card 1 or card 2 to make a call.
5.5
Adjust volume of receiver
You can press up and down key of the phone to adjust volume of receiver during communication.
5.6
Answer call
The phone will prompt you by the way you have set for incoming calls, including ringing, vibration, vibration & ringing and
ringing after vibration, if any call is dialed in.
Press dial/call key of either card 1 or card 2 if you want to answer incoming call.
Press On/Off key or end key or click [reject] in the lower right corner if you need to reject call,
If you have applied calling identification service, calling number will appear on the screen when a call is incoming. If the
number has been stored in phone book, then corresponding name will be displayed in the screen.
If card 1 is called, “SIM1” will be marked before incoming call number or name.
