ITT Flygt 3102, Инструкции по обслуживанию и ремонту

Страница: 9 / 72

ATEX guidelines
ATEX compliance is fulfilled only when you operate the unit within its intended use. Do not change the
conditions of the service without the approval of an ITT representative. When you install or maintain ATEX-
compliant equipment, always comply with the directive and applicable standards in IEC/EN 60079–14.
Permitted liquid level for ATEX
See the dimensional drawings of the product for the minimum permitted liquid level according to the
ATEX approval. If the information is missing on the dimensional drawing, the product must be fully
submerged. Level-sensing equipment must be installed if the product can be operated at less than the
minimum submersion depth.
Monitoring equipment
For additional safety, use condition-monitoring devices. Condition-monitoring devices include but are not
limited to the following:
• Level indicators
• Temperature detectors
Environmental safety
The work area
Always keep the station clean to avoid and/or discover emissions.
Recycling guidelines
Always recycle according to these guidelines:
1. Follow local laws and regulations regarding recycling if the unit or parts are accepted by an authorized
recycling company.
2. If the first guideline is not applicable, then return the unit or parts to your ITT representative.
Waste and emissions regulations
Observe these safety regulations regarding waste and emissions:
• Appropriately dispose of all waste.
• Handle and dispose of the processed liquid in compliance with applicable environmental regulations.
• Clean up all spills in accordance with safety and environmental procedures.
• Report all environmental emissions to the appropriate authorities.
Electrical installation
For electrical installation recycling requirements, consult your local electric utility.
Introduction and Safety (Continued)
Flygt 3102 Service and Repair Instructions 7