DANGER!
Risk of injury due to running pump!
–
Do not touch the pump when it is running.
–
Do not work on the pump when it is running.
–
Prior to all assembly and maintenance work, switch off the
motor and safeguard against being switched on again.
–
Prior to all assembly and maintenance work safeguard the
pump against pressure charging.
7.5.1 Order spare parts
1.
The following information is required for ordering spare parts
Chapter 3.1.1 ‘Type plate’ on page 16
n
brief designation of the pump,
n
order number,
n
machine number/serial number,
n
item number of the part (
spare parts list) or TAG number (
manu-
facturer's components list),
n
name,
n
number.
2.
Specify internal clearance when ordering bearings (do not use universal
bearings):
7.6 Lubrication points
Fig. 19: Overview of lubrication points
No.
Description
No.
Description
1
Oil inlet and bleeding
3
Oil drain
2
Oil sight glass
Oil lubrication procedure
Maintenance and repairs
Type SLH-4G, SLHS-4G
68
01/2016 JPB Rev. 5
