26
Doc.
:DX
First edition date :12/98
Revision
date :
Assembly
• Tap the head into position with a
rubber hammer, being careful not to
damage it. Lubricate the thread with
HT1800 or equivalent type qrease,
and tighten the screws. Make sure
that the washers are in place under
the plastic part of each screw.
(driving torque 5-6Nm).
• Fasten the screw in the center of
the head and make sure that the
O-ring is in place.
(driving torque 5-6Nm)
All manuals and user guides at all-guides.com
