ITS Telecom EKSELANS KB TG-2, Руководство пользователя

Страница: 6 / 10

6
Usage
Activate Panel
1. When the keypad is in sleep mode, touching any button of the keypad could activate
the keypad.
2. After being activated, the keypad would synchronize the real-time status with the
alarm system immediately, the result would be represented by the status bar.
3. When there is no operation on the keypad, it will sleep within 10 seconds.
4. When the keypad is sleeping, it will not react to any signal sent from the system until
the next activation.
Why sleep?
Since this keypad is designed to be able to work with battery only, sleeping is the solution
for long-time use.
When the power adapter is connected, it starts providing power and charging the battery.
With the help with over-charging protective circuit, we recommend users to keep the
adapter connected while using.
Arm/Disarm/Home Arm
Input the operation code, and press [Arm] [Disarm] or [Home Arm] key. The status bar
would flash once and then change the color as following pattern after command is
executed correctly.
[ Arm] : Red
[ Disarm] : Green
[Home Arm] : Blue
Note: The operation code is saved in the main panel, which can be modified by App/PC
client. For GSM model, the keypad operation code is the same as Administrator Password
(1234 by default). For networking model, the keypad operation code is the same as Device
Password (1234 by default).
Read the RFID tag on the keypad panel, the system would Disarm immediately if the tag
is paired before.
Once the system is in SOS status and the keypad is activated, the status bar would be
red-flashing and the keypad would generate beep alarm sounds for 1 minute.