Itronix X-C 6250 Pro 300 NT, Руководство пользователя NT

Страница: 45 / 153

45
Section 4. If You Have a Radio Modem
79-0030-001 11 January 2001
GSM
To use your GSM International Radio Software you will need to install
the GSM modem, the GSM software and a 3V Subscriber Identity
Module (SIM) Card.
To install the Wavecom GSM modem, do the following:
1 Go to Start, Settings, Control Panel and click on Modems.
2 Click Add.
3 Check the box “Don’t detect my modem, I will select it from a list”,
then click Next.
4 Select the “Manufacturers” Wavecom name, and the “Models”
Wismo2C , then click Next.
5 Select to install your modem as “Selected ports” on COM4 and click
Next.
6 Select Finish, then Close.
7 You may have a window titled “Modem Setup” that pops up and
says:
“Dial Up Networking needs to be configured because the list of
installed modems has changed. Would you like to do this now?”
Select Yes.
8 You will have a window pop up that is titled “Remote Access Setup”.
Select Add. A window will pop up titled “Add RAS Device” with
“COM4 - Wismo2C”. Select OK.
9 Select Yes when it asks you to restart your computer.
CAUTION Your modem generates radio frequency (RF) signals. Do
not operate the radio modem before you have registered it with a
network provider. The network will not accept a signal from an
unregistered device. Unauthorized use of your radio modem may
interfere with local business or government communications,
resulting in fines or other legal action.
All manuals and user guides at all-guides.com