MCLite Installation Overview
Mobile Collector Lite Installation Guide
3
MCLite Installation Overview
Installing the MCLite hardware in a vehicle involves the following
procedures:
1.
Install the FC200 vehicle dock. See the instructions in the
FC200
Vehicle Dock User's Guide
included with the MCLite installation
package.
2.
Set up the FC200 handheld data collector. See the instructions in
the
FC200 Getting Started Guide
included with the MCLite
installation package.
3.
Install the MVR handheld software on the FC200. See
“Installing the MVR Handheld Software” in the
MV-RS
Installation Guide
.
4.
Insert the FC200 into the vehicle dock.
5.
Mount the MCLite RF unit on the passenger-side seat back.
6.
Connect the RF unit to its power supply through the vehicle
cigarette lighter socket.
7.
(Optional) Connect the FC200 handheld to the RF unit, using the
[RS-232] cable provided.
This cable provides power to the handheld, as well as
communications with the RF unit. If you do not use the cable to
connect the handheld to the RF unit, the handheld will draw
power from its internal battery and automatically use Bluetooth
technology to communicate with the unit.
8.
Install the RF unit's magnetic-mount antenna, using the antenna's
magnetic roof mount and coaxial antenna cable.
To mount the MCLite RF unit (radio) on the passenger-side
seat back
1.
Slide the RF unit into the vehicle mount.
