1
1) Place the main unit vertically down to the sub-woofer top as show on picture
2) Pull the main unit backward unit the bracket hook up & tightly as show on picture
.
3) Try to lift up the whole system and check whether the main unit & sub-woofer are being combined tightly.
II) Wire connection
1) Connect the end of the speaker cable(RCA plug)
to the speaker out jack (red & white head)
(22) at the back of main unit, another
Terminal connect to the speaker clip of the
Speaker box back side (red color of speaker
Cable to red color of speaker clip).
2) Connect one end of the RCA cable (yellow head)
To the sub-woofer out jack (24) at the back of
Main unit to the sub-woofer in jack (28) at the
Back of the sub-woofer
III) Power supply
Connect the AC power cord from the main unit (25) to the AC socket(29) of Sub woofer unit and AC power cord from sub-woofer
unit (27) to the main power supply from your home area. Turn on the unit by On/Off button at main unit (14) and switch on the
sub-woofer (13) respectively. If the LCD display (2) and the Sub-woofer on/off indicator (13) is light up with blue light. It means
the system is now ready to play the music.
Setting the clock
1. Set unit in standby mode.
2. Press & hold the “ Mem/Clk-adj ” button (16), the LCD display (2) will show “ 24hr ” and flashing. Press Skip up
or
Skip
down
button (10) to select the appropriate area hour format (12hr/24hr).
Press the “ Mem/Clk-adj ” button (16) the first
& second digit of “ 00 ” is flashing on the LCD display (2). Press Skip up
or
Skip down
button (10) to set the
correct hour. Press “ Mem/Clk-adj ” button (16) to store the correct hour.
3. The third & fourth digit of “ 00 ” is flashing, press the Skip up
or
Skip down
button (10) to set the correct minutes.
Then press “ Mem/Clk-adj ” button (18) to store the correct minute.
The clock setting mode will automatically quit if no button is being pressed in a period of about 5 seconds after
pressing the “ Mem/Clk-adj ” button.
The pre-set time will be re-set completely if dis-connecting the main power supply. You are
recommended to switch the system into standby mode for convenience usage.
Listening to radio
Manual tuning
1. Press Function button (15) to select “ Tuner ” mode.
2. Tune to the required station by pressing the Tuning “ up “ or ” down ” button (10).
3. Adjust Volume up/down button (3) to the desired main volume level.
4. Adjust the sub-woofer volume control (26) to proper level match the main unit volume level.
Auto tuning
1. Press Function button (15) to select “ Tuner ” mode.
2. Tune to the required station by pressing the Tuning “ up “ or ” down ” button (10) for 1-2 seconds and then release.
3. The unit will start seeking automatically and stop until a radio station is reached.
4. Repeat step 2 & 3 until the desired radio station is being reached.
5. Adjust volume up/down button (3) to the desired volume level.
Preset stations
You can store up to 20 radio stations in the memory
Set to tuner mode.
1. Turn to the desired radio station by “ manual” or “ auto ” tuning method.
2. Press the Mem/Clk-adj ” button (16) until the “ MEM ” indicator and preset station number flash on LCD display (2).
3. Press “ Folder / Pre-up
button (17) to select the desired station memory for storage.
4. Press “ Mem/Clk-adj ” button (17) again to confirm the setting.
