4
1. Set the Off/Function selector (17) to Phono/Aux/Bluetooth position and keep the Phono/Bluetooth
button (9) in high level (Phono/Aux).
2. Set the speed selector to the proper position depending on the record to be played.
3. Place the record on the platter (use the spindle adaptor if required).
4. Lift the tone arm from the rest and slowly move it to the record side. The platter will start to
rotate.
5. Place the tone arm to the desired position on the record.
6. Adjust the volume to the desired level.
7. At the end of record, the platter will automatically stop rotating. Lift the tone arm from the record and
return it to the rest.
8. To stop manually, lift the tone arm from the record and return it to the rest.
Remark
: For some records the auto-stop area will be out of the unit setting, so it will stop before the last
track finish. In this case, select the auto-stop switch (24) to “ off “ position, then it will run to the end of the
record but will not stop automatically (turn off the unit by power button or switch back the auto-stop switch
to “ on “ position to stop the platter rotating). Then put the tone arm back to the rest position.
Remark : Due to Phono and Aux design in same channel of this unit, once the Aux in jack (29) plugged by
any 3.5mm stereo plug, the Phono function will change to Aux in automatically and the turntable will stop to
spin. Made sure the Aux In jack (26) without plugged by anything before playing phono.
Aux-in connection
Connect another audio device, e.g. (portable) CD player, MP3 player, to this system via a provided cord
with 3.5mm dia plug. Connect one end of this cord to the 3.5mm dia. headphone jack on the external
device and the other end to the Aux-in jack (29) on the back of the unit. Set the Off/Function selector (17)
to Phono/Aux/Bluetooth position and keep the Phono/Bluetooth button (9) in high level (Phono). When
connected in this way it is possible to play back the music already on the connected device and the
portable device such as mobile phone, portable MP3 player…etc
Bluetooth connecting and Playback
1. Set the Off/Function selector (17) to Phono/Bluetooth position and keep the Phono/Bluetooth button (9)
in low level (Bluetooth).
2. The Bluetooth LED indicator (5) will flashing, it means the Bluetooth in non connection / searching
mode.
3. Switch on the Bluetooth feature of your Bluetooth device (such as mobile phone) and select
“ Goldsound ” Bluetooth equipment to connecting.
4. Once the connecting was finish and connect successfully, the Bluetooth LED (10) will change to light
up.
5. Start to playback your Bluetooth device and enjoy the music by the main unit.
Remark : For convenience re-connect to another Bluetooth device. Press and hold the Play button (2),
main unit will disconnect with the existing Bluetooth device. Repeat step 3 again to connect another
Bluetooth device.
Line out connection
You can connect the system to your whole hi-fi system by connecting the line out socket (26) to the
auxiliary input socket with a RCA cable (not included).
5
