Itowa IT3R16, Руководство пользователя

Страница: 21 / 22

RECEIVER IT3R16
USER MANUAL
16
Mode Led S3
Not assigned
Mode Led S4
E2p OK.
Error in eeprom, flashes the number of times corresponding to the
detected error (see table of errors).
Mode Led LINK
Set in stand-by
Radio frequency signal received recognized as its own.
Radio frequency signal received but it is not recognized as its own
Error in radio frequency receiver (if transmitter is on).
Mode Led PWR
Correct power supply
Power supply low
Power supply insufficient.
No power supply
Mode Led
Led off.
Slow Flashing
Led off with quick flashing on.
Led on with quick flashing off.
Led on continuously.
On starting up the set and as long as it is shutdown with the STOP BUTTON or with time, the working
channel is indicated through pulses in the led LINK and PWR (tens and units).
Once the band scan has finished, the free channels found will be displayed.
While the code or channel is displayed, the set can be started up and this display will pass on to the
normal start display mode.