OPERATIONAL INSTRUCTIONS:
2. Deleting Fingerprints
(3.1)
Deleting Individual Fingerprint with User Number
1. Slide open front cover and press “2” then “#”
2. Enter master code
3. Enter 3-digit User Number
4. Repeat 3-digit User number
5. Press “#” to confirm
6. You will hear a “BEEP” sound when fingerprints are
successfully deleted
To delete user# 123 with default master code 11111111
Enter sequence on keypad: 2, #, 11111111, 123, 123, #
Deletion succeeded when you hear a “BEEP” sound.
(3.2)
Deleting Individual Fingerprint without User Number
1. Slide open front cover and press “2” then “#”
2. Enter master code
3. Press “#” to confirm
4. Put finger tip at the center of the scanner when blue light
is on. Lay flat and hold firmly until you hear a “BEEP”
sound
To delete a non-assigned user number’s fingerprint with
default master code 11111111
Enter sequence on keypad: 2, #, 11111111, # When the
scanner lights up, put the FINGERPRINT on the scanner
firmly
until you hear a “BEEP” sound to confirm the deletion
succeeded.
(
3.3)
Deleting ALL Fingerprints
1. Slide open front cover and press “3” then “#”
2. Enter Master Code
3. Press “#” to confirm
4. You will hear a “BEEP” sound when all fingerprints are
successfully deleted
To delete fingerprints with default master code 11111111
Enter sequence on keypad: 3, #, 11111111, # When you
hear a “BEEP” sound, all memories are deleted
successfully.
3. Registering Passcodes
The passcode is always an
8-digit
number.
(4.1)
Registering Passcode
1. Slide open front cover and press “1” then “*”
2. Enter Master Code
3. Enter 3-digit User Number
4. Enter Passcode
5. Repeat Passcode
6. Press “#” and you will hear a “BEEP” sound when
passcode is successfully registered.
To register user# 123 with default master code 11111111 &
passcode 02230223
Enter sequence on keypad: 1, *, 11111111, 123,
02230223, 02230223, #
If you hear 3 “BEEPS”, your passcode is not accepted.
Please repeat steps 1 to 6.
Reason:
The User Number may be occupied. Try another
new User Number.
Bio-Matic™ Fingerprint Door Lock
Single-Latch
User Manual
4. Deleting/Modifying Passcodes
(4.1)
Deleting Individual Passcode with User number
1. Slide open front cover and press “2” then “*”
2. Enter Master Code
3. Enter 3-digit User Number
4. Repeat 3-digit User Number
5. Press “#” to confirm
6. You will hear a “BEEP” sound when passcode is
successfully deleted
To delete user# 123 with default master code 11111111
Enter sequence on keypad: 2, *, 11111111, 123, 123, #
(4.2)
Deleting ALL Passcode
1. Slide open front cover and press “3” then “*”
2. Enter Master Code
3. Press “#” to confirm
4. You will hear a “BEEP” sound when all passcodes are
successfully deleted
To delete passcodes with default master code 11111111
Enter sequence on keypad: 3, *, 11111111, #
(4.3)
Modifying Passcodes
1. Slide open front cover and press “0” then “*”
2. Enter Current Passcode
3. Enter New Passcode
4. Repeat New Passcode
5. Press “#” when finish
6. You will hear a “BEEP” sound when the passcode is
successfully modified
To modify current passcode 22222222 to 33333333
Enter sequence on keypad: 0, *, 22222222, 33333333,
33333333, #
5. Set the Bio-Matic Lock to Passage Mode
Passage Mode enable users to keep the door unlock.
Users can access without using Fingerprints,
Passcodes or Keys. Just slide open the cover to open
the lock in Passage Mode.
(5.1)
Set to Passage Mode
1. Slide open front cover
2. Press “*” two times
3. Enter Master Code
4. Press “#” to confirm
5. You will hear a “BEEP” sound when passage mode is
set.
(5.2)
Deactivate Passage Mode
Repeat steps 1 to 4 on (5.1)
6. Unlocking the Bio-Matic Lock
(6.1)
Unlock by using fingerprints
1. Slide open front cover and the scanner light will turn on
2. Firmly press finger tip at the center of the scanner
3. Door is unlock when you hear a “BEEP” sound
4. If you hear 3 “BEEPS”, your fingerprints is not
recognized. Repeat steps 1-3 again.
(6.2)
Unlock by using passcodes
1. Slide open front cover
2. Enter 8-digit passcode to unlock
(6.3)
Unlock by using backup key
1. Remove the keyhole cover by using the removal hook
which comes with the lock.
2. Use the backup key to unlock as you would normally
open a lock