Itouchless AV002A, Руководство по эксплуатации

Страница: 9 / 13

Turn off the power switch and put the Cleaner on a flat surface with its bottom side up.
Use cross head screwdriver to remove the fixing screw on the right, and then take
out the main brush, rubber brush and brush coupler together as shown in the
following drawing.
- 8 -
Brush coupler.
INTELLIGENT CLEANER
OPERATING MANUAL
Clean the chamber where the brush is located and the contaminants on brush and
rubber brush.
Wipe out dirt on the metal shaft and bearing of the brush coupler and the brushes
(this may not be necessary to do after every cleaning) as per the following drawings.
If necessary, you may add a little lubricant to it.
5.Put the brush coupler and brushes back and tighten the screw.
1.
Clean the main brushes of the Cleaner
2.
3.
4.