iTOOLco Cannon 12K, Руководство пользователя

Страница: 6 / 22

ITOOLCO CANNON 12K USER’S GUIDE 1801C12KUG
P a g e | 6
WARNING – TOOL USE HAZARDS (continued)
Do not operate cable puller in wet or damp locations. Do not
expose to rain.
Do not operate in an explosive atmosphere.
Some components of the mobile cable pulling package exceed
50 lb. and will require more than one person to lift, transport, or
assemble.
Always inspect pins to be sure they are the correct part number
for the assembly and are fully inserted through holes and have
spring clips properly attached. Do not substitute any other object
for factory supplied pins.
When making a vertical pull, keep the area underneath the cable
puller clear of all personnel.
Use caution during assembly and disassembly of boom
components. Keep pins in place to avoid uncontrolled movement.
Have control of boom components before removing any pins.
Always ensure factory supplied boom tubes are fully inserted into
the receiver tubes and that the spring loaded boom pins are fully
engaged.
Do not switch between low and high speeds while the foot pedal
is depressed.
Always make sure the puller has completely stopped before
switching from low to high speed or high to low speed.
Do not alter this cable puller. Doing so will void the warranty.
Guards and safety features are provided for your protection.
Do not use an extension cord longer than 100’. Extension cord
should be a minimum of 12 gauge wire with ground.
FAILURE TO OBSERVE THESE WARNINGS CAN RESULT IN SEVERE
INJURY OR DEATH.