glossy surface. Otherwise, this mouse may not operate normally.
!
For consideration of saving battery power, it is strongly recommended to operate an optical
mouse on a bright surface with fine texture to obtain lower power consumption of the Agilest high
illumination LED. A very dark surface will cause higher power consumption.
!
For a better transmission distance, avoid to use this device on a metal plate or desktop because a
large surface of iron, aluminum. Operating on a metal may cause the transmission distance shorter.
Installation Guide
(Applicable to all our Bluetooth Mouse, take PA-BTM02 for
example)
Step1
. Inserting Batteries
1. Remove the battery cover.
2. Inset 2 AAA alkaline batteries. (Please be cautious of the polarity of the batteries).
3. Place back the battery cover and press the multifunction button to turn on the Mouse, and it will
be in the match state. (The multifunction button is at the bottom of the Mouse, with Match, Turn
on and Reset functions). Some models have special power button, please turn on the Mouse first,
and then press the multimedia button.
Step2.
Connecting the Mouse to the Dongle.
Before you install the Bluetooth Mouse, please make sure that your computer supports Bluetooth
function, and finished the Bluetooth software installation. Software available like
Wincomm(Recommended), IVT or the Microsoft built-in software(can not connect to the
headset).
Press and hold the connect button at the bottom until the Red LED light turns on.(changes among
High-light, Low-light and Off, ready for the match), pls note that the connect button is only useful
during the match procedure.
Match Procedure
A: Match on Widcomm (recommended)
1
．
Double click the Icon again
, “My Bluetooth Place” pops up;
2
．
click “Bluetooth Setup---Bluetooth Setup Guide”.
3
．
In the Setup Guild window, click next button, wait until the system found the mouse, select
“Mouse”, click “Next”. Hint for connection,
