PM380/427LS User Manual
8
CAUTION
Do not turn on/off relays and/or contactors near power cables,
signal cables, and/or driver cards.
Failure to follow this could result in malfunction due to noise generation.
LED or Pull-up/Pull-down circuits implemented in the output circuit
of control devices could result in unexpected operation.
Carefully check the output circuit.
Securely wire each cable to connection parts.
Improper wiring could result in electric shock and/or malfunction.
Do not unplug power and/or signal cables during operation except
in an emergency.
Also, do not run/stop this product using the power supply.
(Use the signal.)
Failure to follow this could result in malfunction.
Do not forcibly rotate the MDR in its stopped state with external
force.
Failure to follow this could result in damage to driver cards, and/or their lifetime to
be significantly shortened.
Make start-up inspection, and check that devices are free from
any abnormalities, and that safety equipment functions correctly
before using the product.
When disposing of the product, make consigning contracts with
licensed industrial waste disposers, and consign the disposal to
them.
Do not turn off the power during transfer (during MDR rotation)
except in an emergency.
Failure to follow this could result in malfunction.
3-1.
General precautions
3. Safety precautions
Safety precautions
Advance preparation
Check Product
Installation
Maintenance/Inspection
Specifications
General precautions
