BM-18A
This document is protected by copyrights.
Copying, using,
or distributing without permission of PROMOTECH is prohibited.
6
2. SAFETY PRECAUTIONS
1.
Before use read this Operator’s Manual and complete a training in occupational
safety and health.
2.
Use only in applications specified in this Operator’s Manual.
3.
Make sure that the machine has all parts and they are genuine and not damaged.
4.
Make sure that the specifications of the air source are the same as those specified
on the rating plate.
5.
Supply only with clean and lubricated air. Make sure that the air source has an air
preparation unit that contains a filter, regulator, and
lubricator (FRL).
6.
Keep untrained bystanders away from the machine.
7.
Before each use, ensure the correct condition of the machine, air source, supply
hose, fitting, and tools.
8.
Do not carry the machine by the air hose and do not pull the air hose. This can
c
ause damage and serious injuries.
9.
Before each use, make sure that no part is cracked or loose. Make sure to main-
tain correct conditions that can have an effect on the operation of the machine.
10.
Avoid accidental starts. Do not put the machine so that the mot
or will start. Do
not carry the machine by holding the ON/OFF lever.
11.
Keep the machine dry. Do not expose the machine to rain, snow, or frost.
12.
Keep the work area well lit, clean, and free of obstacles.
13.
Do not use near flammable materials, or in explosive environments.
14.
Use only tools specified in this Operator’s Manual.
15.
Do not use tools that are dull or damaged.
16.
Make sure that the cutting inserts and the milling head are correctly attached.
Remove wrenches from the work area before you connect the machine to the air
source.
17.
Do not use the machine so that the milling head is up.
18.
If the cutting edge of an insert is worn, rotate all inserts by 90° or 180°. If all
cutting edges are worn, replace all inserts with
new ones specified in this Oper
a-
tor’s Manual.
19.
Use eye and ear protection, non
-
skid footwear, and protective clothing. Do not
use loose clothing.
20.
Do not touch chips or moving parts. Do not let anything catch in moving parts.
