Using the Reverse Feed Feature
Holding the
New Cartridge and Feed Buttons down at the same time
, with the
printer covers open, will reverse paper out of the paper path.
Inserting Validation Forms (Validate single ply forms only)
1)
Insert a square, smooth corner of the validation form into the
validation slot, using the right edge of the validation slot as a guide.
When the form is
detected by the
printer, the
FORM
light
will change
from blinking to
steady on.
2)
RELEASE THE
FORM. The form
will be automatically
drawn into the
printer and printing
will begin.
3)
When printing is
complete, the
printer will feed the
form out. Remove the form.
Printing receipts
Wait for auto-cutter to complete cut before removing the receipt.
Quick start reference to using Keypad Buttons
What Buttons
do I use to…
Do this…
Turn the Printer ON
Press and release the front Power Button
Turn the Printer OFF
Press and release the front Power Button
Remove the Ink Low
Warning After Installing
New Ink Cartridges
Press and release the New Cartridge Button
immediately after installing any new ink cartridge(s).
Clean the Ink Cartridges
Press and release the New Cartridge Button.
Repeat up to 3 times.
Print the Ink Level
Status
Press and release the New Cartridge Button.
Feed Paper
Press the Feed Button, press once for a single line
feed, press and hold for continuous feed.
Reverse Feed Paper
With printer covers open, press and hold the New
Cartridge and the Feed Buttons at the same time.
100-04951B
10
Printable side
of form
Power
Button
