iTero Element 5D Plus Скачать руководство пользователя страница 96

Страница: 96 / 208

Invi iRecord:

Records the file (iRecord) and uploads an Invisalign scan to the IDS portal. Saves two

different scans, as may be requested for insurance-refund purposes.

Restorative:

A scan that you need to send to a laboratory for modeling or milling.

The

New Scan

window is displayed, according to the case type selected.

Figure 86: New Scan window – iRecord case type

3. Depending on the case type selected, fill in the relevant details.

Restorative

and

Chair Side Milling

case types, see section 4.4.1.

iCast

: Select the

Brackets Present

check box if there are brackets on the patient’s teeth.

iRecord:

Select the

Brackets Present

check box if there are brackets on the patient’s teeth.

Select the

Multi-Bite

check box if a multi-bite scan is required. This enables you to preserve the 2-bite

relation based on your needs, and delivers precise bite information to the lab for appliance fabrication, for
example, sleep apnea appliances.

If your subscription package includes the

Final Records

option, you are able to select the treatment stage.

For more information, refer to the Invisalign documentation.

4. If relevant, from the

Send To

drop-down list, select the lab to which the scan should be sent.

5. In the

Scan Options

area, select whether to capture NIRI data in the scan. By default all images are captured

with NIRI data enabled. If required, you can select to disable NIRI data capture. For more information, see
section 3.6.2.3.

6. Select the

New sleeve attached

check box to confirm that a new sleeve has been attached to the wand. For

more information, see section 4.4.3.

iTero Element® 5D Plus User manual

Содержание Element 5D Plus





































































































































































































Результаты поиска

Содержание Element 5D Plus

Отзывы:

iTero Element 5D Plus, Руководство пользователя, Страница: 96 / 208

Результаты поиска

Содержание Element 5D Plus

Отзывы: