Itel DPR06 FM Скачать руководство пользователя страница 5

Страница: 5 / 58

Description

This product is a fully multiband digital audio processor ideal for FM broadcasting.
All audio processing is realized using DSPs, allowing for stable performance over time and
extending functionality with firmware upgrades.

1.1

List of changes

1.1.0 17/06/2014

first release

2.0.0 23/09/2014

updated to new firmware 2.0 features

2.0.1 20/11/2014

updated to new firmware 2.1 features

3.0.0 10/03/2015

updated to new firmware 3.0 features

3.1.0 25/01/2016

updated to new firmware 3.1 features

3.2.0 14/09/2016

updated to new firmware 3.2 features

1.2

Warnings

Before attempting any operation, please follow the safety instructions contained in the
following paragraph.

The producer declines any liability for damage to people or things due to non-compliance,
even if partial, of the following indications

• Ensure that the supply voltage corresponds to what is indicated on the apparatus.

• Ensure that the electrical system is equipped with a ground connection.

• Use only power sockets and cables with ground connection

• Disconnect power before attempting any operation inside the device.

• The power cutting device is the power cord, so this should be easily accessible and the socket
must be positioned close to the apparatus.

• Any operation involving the access to internal parts must be performed only by trained service
personnel.

Содержание DPR06 FM



























































Результаты поиска

Содержание DPR06 FM

Отзывы:

Похожие инструкции для DPR06 FM

Бренды по названию

Популярные бренды

Itel DPR06 FM, Руководство пользователя

Результаты поиска

Содержание DPR06 FM

Отзывы:

Похожие инструкции для DPR06 FM

Бренды по названию

Популярные бренды