7
www.itek-products.co.uk
Using your Dash-cam and Mode selection:
Press the power switch on the left of the
appliance to switch the dash-cam on.
The mode button allows you to cycle through
the different modes:
• Video Camera & Night Recording
• Camera
• Sound Recording
• Playback
Press the mode button to move between the
modes.
Video Camera:
The dash-cam will automatically enter video
camera mode when first turned on.
The blue LED indicator will turn on and the
red dot on the screen will blink to indicate it is
recording.
The recorded file will be saved on the Micro SD
card.
The recording will automatically stop once the
car stops.
To manually record, press the OK button whilst
in video camera mode. Press the OK button
again to stop recording.
Night Recording:
Turn the dash-cam on. Short press the power
button to begin night-time recording.
Press the OK button to begin recording audio.
The blue LED indicator will turn on and the
red dot on the screen will blink to indicate it is
recording.
Press OK to stop recording.
The recorded file will be saved on the Micro SD
card.
Camera:
Turn the dash-cam on and press the Mode
button once to enter into camera mode.
Press the OK button to take a photo. The
screen will flash when the photo has been
taken, and the image will saved onto the Micro
SD Card.
Audio:
Turn the dash-cam on and press the Mode
button twice to enter audio mode.
Press the OK button to begin recording audio.
The blue LED indicator will turn on and the
red dot on the screen will blink to indicate it is
recording.
Press OK to stop recording.
The recorded file will be saved on the Micro SD
card.
Playback:
Turn on the dash-cam and press the Mode
button three times to enter playback mode.
Use the right and left arrow buttons to scroll
through the saved files.
MENU
In any mode, press the Menu button to open
the menu. Each mode has specific menu
options. Use the arrow buttons to navigate
the menu and press OK to select and confirm.
Press the menu button close.
Video Mode:
Size:
Select 1080P/720P/VGA
Time Stamp:
Select Off/On
This setting allows you to select whether
you would like a date or time stamp on your
images. It is recommend to use the time stamp
on your images when using your car cam.
Ensure that you have set the correct time
on the universal menu before choosing this
setting.
