HDMI1,HDMI2 and DP1,DP2.
INITIAL SETUP
Connect the monitor to a power outlet.
1. Press the POWER bu on on the monitor or to turn it on (The indicator will be blue)
2. Connect the relevant cable to the corresponding input on the monitor. The source will be
automa cally detected.
3. To change between inputs, press the “Source” bu on to enter the source menu. Use the
“
◄
”and“
►
” bu ons to choose the input source between
Auto Select
MENU OPTIONS
The menu for the monitor can be accessed by pressing the menu bu on on the control panel. This menu is
separated into the following sub menus: Picture Se ings, Image Se ngs, Colour Temperature, OSD Se ings,
Reset, and Miscellaneous op ons, details of each menu can be found in the following sec on
Input
DP2
DP1
HDMI2
HDMI1
