GETTING STARTED
MONITOR CONTROLS
INITIAL SETUP
Connect the monitor to a power outlet.
1.
Press the POWER bu
tt
on on the monitor or to turn it on (The indicator will be blue)
2.
Connect the relevant cable to the corresponding input on the monitor. The source will be
automa
ti
cally detected.
3.
To change between inputs, press the
“E”
bu
tt
on to enter the source
menu. Use the "
◀
" and "
▶
"
buttons to choose the input source between VGA and HDMI.
MENU OPTIONS
The menu for the monitor can be accessed by pressing the
“M”
bu
tt
on on the control panel. This menu is
separated into the following sub menus: Picture Se
tti
ngs, Image Se
tti
ngs, Colour Temperature, OSD Se
tti
ngs,
Reset, and Miscellaneous op
ti
ons, details of each menu can be found in the following sec
ti
on
Select signal source or Exit OSD
Open the Main OSD Menu Select Submenu
Turn the monitor on or off
Go Up on the Main OSD Menu increase the value of a selected item
Go Down on the Main OSD Menu and decrease the value of a selected item
1
2
3
4
5
