Itek I60011, Инструкция по эксплуатации

Страница: 10 / 12

10 CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6058
Troubleshooting:
The unit does not turn on when
the power switch is pressed
The unit is unplugged. Connect the unit to the AC power
supply.
No sound comes out of the
speakers.
The volume is turned down (to MIN).
The input selector does not match the playback source.
Adjust the volume.
Re-select the desired input source.
The unit does not pick up a
station,and/or the signal appears
weak.
The station is not tuned properly.
Re-tune the unit to your required station.
A TV set may be in use nearby and is interfering with the
radio reception.
Turn off the TV or appliance that is interfering with the signal.
The antenna is not oriented
properly.
Re-orient the antenna until reception improves.
The CD stops immediately after
starting,or the unit pauses or
stops during play.
The CD is inserted upside down.
The CD is dusty or dirty or there is condensation on the CD.
Insert the CD with the printed side up.
Carefully clean and dry the CD.
No sound. The CD player is paused.
Press the PLAY/PAUSE button.
The sound from a specific CD is
distorted, or playback stops or
skips.
The CD is scratched damaged or warped.
The CD should be changed.
The disc is dirty.
Carefully clean the CD.