7
BEFORE YOUR FIRST USE:
1.
Remove your appliance from the packaging.
2.
Dispose of the packaging in a responsible manner.
3.
Please retain all packaging until you have checked
and counted all the parts and the contents against
the parts list.
4.
Locate your appliance in accordance with the safety
instructions.
5.
Your appliance is now ready for normal use.
USING YOUR APPLIANCE:
Charging The Unit
•
This unit can be charged via USB, using the
included USB cable.
•
To charge the unit, insert one end of this cable into
the charging port located at the rear of the unit and
the other end into the USB port of a computer or
smart device, or into a compatible USB adaptor
plugged into the mains. A red light will illuminate to
indicate the unit is on.
•
The Charging indicator at the rear is red while the
unit is charging and goes off once the unit is fully
charged.
•
When charging for the first time, please charge for
at least 3 hour.
•
A fully charged battery will give 3-4 hours play time
at mid volume.
SPEAKER CONTROL PANEL:
ON/OFF/ Volume Control
•
Turn clockwise to power “ON” and increase the
volume. A sound prompt will be heard to indicate
the speaker is on. Turn the control anti-clockwise to
turn the volume down and switch the unit “OFF”.
IDC Input
Insert the charging cable to recharge the battery.
TF Card Port
Insert a TF card into the port to play music stored on the
card.
USB Port
Insert a USB flash drive to play music stored on the drive.
EQ
Press the key to choose between sound modes: Jazz,
Rock, Bass, Normal and Classical.
MODE
Use this key to toggle between modes: AUX, USB, TF and
Bluetooth.
Play/ Pause
Press the key to Play/ Pause the music.
Skip Track
Press the key to move forward through the playlist.
Previous Track
Press the key to move back through the playlist.
AUX cable port
To listen to music from audio equipment (such as mobile
phone, MP3, computer) insert an AUX cable, from the
device to be attached, into the speaker port.
When the light at the rear of the unit turns green press
MODE twice and use the controls on the connected
device to begin playing audio routed through the speaker.
Microphone port
Connect a 6.35 microphone to the input jack.
NOTE:
There are two lights at the front of the speaker that
change colours, randomly, when the unit is switched on.
BLUETOOTH MODE:
Pairing a Bluetooth device
1.
Rotate the power dial to “ON”. The LED status
display will display “BLUE” and then flash “BLUE”.
2.
Turn on the Bluetooth function on your external
Bluetooth device, search for the Bluetooth device
name “i58068” and select to pair. Use “0000” if a
password is required. Once successfully connected
a tone will be heard and the LED will display
“BLUE”.
EN
www.itek-products.co.uk
