Itek DVB-T ITDTR01P, Руководство пользователя

Страница: 11 / 24

7
3.3 Channels Initial Installation
If this is the first time for you to use the DVB-T receiver, after pressing
POWER
button at the screen will appear the Init Install menu.
In the OSD Language item, you could set up the language of the on screen
menus. At the Area item you can choose your current area, where you are
going to search channels.
Once the OSD language and area are selected, press
OK/LIST
button and
select YES on the popup window to start channels installation. Wait a moment
while the unit completes the channels searching process. The channels
founded will be stored automatically
4. DVB-T BASIC OPERATION
Press
PR+
or PR- in your remote control unit to select a channel or just enter
the channel number with the numerical pad.
Press the
TV/RADIO
button to switch between TV and radio channels. To
close the channels list press
EXIT
.
Use the buttons
-
 or 
+
to decrease or increase the volume of the DVB-T
receiver. You can silence the sound from the receiver by pressing
MUTE
button
on the remote control unit.
4.1. Channel List
You can select the channel by using the lists you have created (see chapter 6.1.
Channel Manager). Once the list has been created, press
OK/LIST
to show tha
channels list and press
PR+
or
PR-
to select the one you wish. Press
OK/LIST
to display it. Use
-
 or 
+
display the previous or next genre or press
TV/RADIO
button to switch between TV and radio channels lists. Press
EXIT
to
close the chanels list.