Itek 27A5S, Руководство пользователя

Страница: 10 / 33

9. lndicator Light
1. Insert one end of the DP cable into your PC's graphics card. An HDMl cable may
also be used. HDMI cable is not included.
2. Connect the other end of the cable to the corresponding connector on your monitor.
3. Connect the power cable to your monitor then connect the other end to your power
source. It is recommended that you use a surge protector with adequate voltage if
a wall outlet cannot be reached directly.
4. Locate the power button on the monitor and press it to turn the monitor on.
8. Basic Operation
Eng-8
HDMI Connector
DP Connector
Adaptive-Sync
This feature is off by default. To activate, you must have hardware with Adaptive-Sync capa-
bility, a DP or HDMI cable, and the latest graphic drivers. After connecting your computer and
monitor with a DP or HDMI cable, you may receive a prompt to enable the feature on your
computer. If you do not, you may need to enable the function in your graphics card menu.
See your graphics card manufacturer’s documentation for instructions.
Solid blue light indicates power is on and the monitor is operating normally. Red and
blue flash alternately during standby, Red when shutting down.
Indicator light
DC USB-A USB-A USB-B HDMI 2 HDMI 1 DP Type-C AUDIO