iTegno 39 series Скачать руководство пользователя страница 164

Страница: 164 / 278

iTegno 39XX GPRS Modem

AT Commands Guide

02000C17

•

v1.5

Confidential

All specifications are correct at the time of release. iWOW Connections owns the proprietary rights to the information contained herein this

Connections Pte Ltd

154

10.17

Time Zone RepCTZR

Description:

This command enables/disables the time zone change event and Daylight saving time reporting.

•

Execution command enables/disables the time zone change event and daylight saving timereporting.

•

Read command returns the status of the time zone change event reporting (enable/disable) (on/off).

•

Test command returns list of the supported (on/off)s.

If the reporting is enabled, the MT returns the URC +CTZV: <tz>,<time> , +CTZST: <dst> whenever the time

zone is changed.

Syntax:

AT+CTZR=<on/off>

Command

Possible Responses

AT+CTZR=<on/off>

+CME ERROR: <err>

AT+CTZR?

+CTZR: <on/off>

AT+CTZR=?

+CTZR: (list of supported <onoff>s)

AT+CTZR=?

+CTZR: (0,1)

AT+CTZR?

+CTZR: 0

AT+CTZR=1

Defined Values

disable time zone change event reporting and URC +XNITZINFO (default)

enable time zone change event reporting and URC +XNITZINFO.

<tz>

integer value indicating the time zone.

<time>

string type value; format is “yy/MM/dd,hh:mms”, wherein characters indicates year, month,

day, hour, minutes, seconds.

<dst>

daylight savings time value:

Содержание 39 series























































































































































































































































































Результаты поиска

Содержание 39 series

Отзывы:

Бренды по названию

Популярные бренды

iTegno 39 series, Руководство по командам

Результаты поиска

Содержание 39 series

Отзывы:

Бренды по названию

Популярные бренды