iTechworld iTECHDCDC20, Руководство пользователя

Страница: 3 / 13

Locate where you are going to install the iTECHDCDC20.
Ensure the iTECHDCDC20 is securely mounted using the
brackets.
Ensure all cabling meets specifications and will not be
exposed to excessive heat/moving parts or abrasion.
If the charger is located in a camper/caravan we
recommend the use of an Anderson style plug between
the tow vehicle and the camper/caravan.
Fit the suitable connectors on either end of the twin core
cables.
The iTECHDCDC20 has a shared negative internally.
Using twin core wiring between the auxiliary battery
and iTECHDCDC20 connect the red (+) to the (+ blue
cable) DC output terminal(Black anderson plug) and the
black (-) to the (-)negative on the rear of the
iTECHDCDC20. It is recommended to install a 30Amp fuse
(not included) on the positive cable between the auxiliary
battery and the iTECHDCDC20. The fuse should be
located as close as possible to the battery.
The iTECHDCDC20 must be installed by a qualified auto
electrician. Installation of the iTECHDCDC20 will require
twin core wiring and suitable connectors. Anderson plug
type connectors are supplied in the kit.
Any existing cables used in conjunction with the
iTECHDCDC20 will require checking to ensure the gauge is
correct.
INSTALLATION
USER GUIDE