iTechworld AU4i, Руководство пользователя

Страница: 20 / 29

19
To maintain your warranty, please ensure to follow the maintenance
schedule above.
This can be done by yourself, a mechanic or contact iTechworld on 1300
483 249.
CHANGING THE OIL
Oil Filler Cap Oil Discharge Pipe
1. Using the screwdriver provided loosen the 2 screws and open the oil/
service /air filter access panel.
2. Unscrew the oil filler cap and remove.
3. Screw the oil discharge pipe into the oil reservoir and tighten.
4. Tilt your iTechworld AU4i Inverter Generator forward and pour the oil
into a suitable container.
5. Using the oil container provided, fill the iTechworld AU4i Inverter
Generator with 450ml of 10W30 oil.
6. Unscrew and remove the oil discharge pipe.
7. Refit the oil filler cap and tighten finger tight.
8. Tilt your iTechworld AU4i Inverter Generator side to side a few times
to ensure that the oil alarm float is level.
9. Refit the oil/ service /air filter access panel, using the screwdriver
provided tighten the 2 screws.
WARNING! If engine is hot, oil can discharge quickly.
Ensure engine is switched off and the fuel tap is in the ‘off’ position.