Routine
Maintenance
Copyright © Itech Electronics Co., Ltd.
39
Error information list
Error information
Error information explanation
usb is not detected
[Error description] No USB peripheral is
found.
[Possible cause] No USB peripheral is
inserted.
[Disposal] Insert the U disc type USB
peripheral and then copy the screen.
Save screen fail
[Error description] The screen is not saved
successfully.
[Possible cause] USB is disconnected.
[Disposal] Reinsert the USB peripheral.
Start time is less than current
[Error description] The start time is less than
the current time.
[Possible cause] The integral setting is
incorrect.
[Disposal] Reset the integral start time.
End time is less than current
[Error description] The ending time is less
than the current time.
[Possible cause] The integral setting is
incorrect.
[Disposal] Reset the integral ending time.
Timer must be larger than zero. [Error description] The set time must be
larger than zero.
[Possible cause] The set integral time is not
correct.
[Disposal] Reset the set integral time.
Harmonic open fail
[Error description] The harmonic function
cannot be enabled.
[Possible cause] Communication
abnormality
[Disposal] Check the communication cable.
Integ open fail
[Error description] The integral function
cannot be enabled.
[Possible cause] Communication
abnormality
[Disposal] Check the communication cable.
Integ start fail
[Error description] The integral function
cannot be started.
[Possible cause] Communication
abnormality
[Disposal] Check the communication cable.
Integ stop fail
[Error description] The integral function
cannot be stopped.
[Possible cause] Communication
abnormality
[Disposal] Check the communication cable.
Scope openfail
[Error description] The oscilloscope function
cannot be enabled.
[Possible cause] Communication
abnormality
[Disposal] Check the communication cable.
Time set fail
[Error description] Time setting fails.
[Possible cause] Time setting is illegal.
[Disposal] Reset the system time.
