Action
1. Press + , Setting LEVER A=5A, LEVER B=10A, transition mode is TOGGLED.
2. Press + to activate the transient mode.
3. Press + switch to the current value of 10A.
4. Press + switch between 5A and 10A.
5. Press + again to stop the transient operation.
Shift
Shift
Shift
Shift
Shift
Tran
Tran
S-Tran
Trigger
Trigger
List Operation
Users can use the front panel keypad or Power View 8500(PV8500) software to
programming the list sequence. Please refer to the software user’s guide.
The following example will help you how to do the list operation in front panel.
Action
1) Press the button of , execute the input of Load I in OFF state.
2) Press + , move cursor to the option of menu of CONFIG, Press
into the next step menu, move cursor to TRIGGER SOURCE. Press and move
cursor to IMMEDIATE <DEF>, setting trigger source mode is panel IMMEDIATE mode.
3) Press to confirm.
4) Press to the previous menu, move cursor to LIST SET.
5) Press into the next step menu .move cursor to EDIT LIST FILE.
6) Press into the next step menu, move cursor to CURRENT LIST, select
CURRENT MODE.
7) Press , move cursor to REPEAT. Setup LIST is in cycle mode.
8) Press to confirm, setup the list steps = 5.
9) Press to confirm, setup step 1 current =3A.
Shift
On/Off
Menu
Esc
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Trigger
1
0
2 3 4 5
List count=1
List count=2
List sequence
USER’S GUIDE 35
FRONT PANEL OPERATION
