ITech IT-E154, Руководство пользователя

Страница: 10 / 19

IT-E154 User Manual
Chapter2 Mounting Instrument
2.1 Preparation
Before installing any IT-E154 rack mount kit, it is necessary to remove the side
footing of the instrument. Use a screwdriver to loosen the two screws for fixing
the side footing, and remove the side footing. As shown in the figure below,
remove four side footings at the front, rear, left and right of the instrument.
After the side footings are removed from the instrument, the user can see the
rack mounting holes on both sides of the instrument.
2.2 Mounting a Single Instrument
Cabinet with a tray
If the 19-inch cabinet has a tray, to mount a single set of instrument into the
cabinet, it is only necessary to mount the IT-E154B rack kit. The mounting
operation steps are as shown below.
1. Based on the step
①
shown in the figure below, mount the IT-E154B rack
accessories on the left and right sides at the front of the instrument.
2. Based on the step
②
shown in the figure below, use screws to fix the rack
handle.