Itec AV-BOX, Инструкция по эксплуатации, Страница: 6 / 12

ITEC AV-BOX
6
www.itec-audio.com
AV-BOX
7. Connecting the ITEC LECTERN SUCCESS
Cable connection: the ITEC AV-BOX is connected to the LECTERN SUCCESS by means of the attached cable.
At the ITEC AV-BOX plug the signal cable in one of the CASS/CD LINE IN cinch sockets(5a), at the LECTERN
SUCCESS plug it in one of the LINE OUT cinch sockets. The volume control CASS/CD (7) lets you choose how
loud the ITEC AV-BOX shall be in proportion to the LECTERN SUCCESS; the best way of doing this is to
- set up the LECTERN SUCCESS and the ITEC AV-BOX/ES, connect them with the devices left off;
- connect the microphone to the LECTERN SUCCESS;
- switch on the LECTERN SUCCESS and adjust the volume;
- switch on ITEC AV-BOX/ES and turn up the volume (control CASS/CD, 7) making sure
that there is no feedback.
Radio transmission: requirements: the LECTERN SUCCESS needs to have a radio transmitter, and the ITEC
AV-BOX needs to have a radio receiver. The volume control WIRELESS (8) lets you choose how loud the ITEC
AV-BOX shall be in proportion to the LECTERN SUCCESS; the best way of doing this is to
- set up the LECTERN SUCCESS and the ITEC AV-BOX/ES, connect them with the devices left off;
- connect the radio transmitter to the LECTERN SUCCESS: plug an MC 12 in one of the
LINE OUT cinch sockets;
- connect the microphone to the LECTERN SUCCESS;
- switch on the LECTERN SUCCESS and adjust the volume;
- switch on the radio transmitter and ITEC AV-BOX/ES and turn up the volume (control
WIRELESS, 7) making sure that there is no feedback.
8. Recording
Connect a tape recorder, MD player or speech mike recording system to the ‘PRE OUT’ cinch socket (5B). You
can record cable microphone, radio microphone and music playback. The output level will depend on how you
have adjusted the controls.
9. Connecting an external amplifi er
The adjusted signal of the ‘PRE OUT’ cinch socket (5B) may be connected to an external amplifi er (see 9.
Recording). However, in most cases, the integrated radio receiver will be needed. In this case, please plug in the
‘HF LINE OUT’ (5C) socket. As for volume, be aware that now the signal of the radio receiver/s overrides your
volume adjustments.
10. Connecting an external radio receiver
To connect an external radio receiver use socket 11 (1/4” mono jack) for audio line input. If needed 12V-DC is
supplied on socket 10 (500mA max)