ITC TS-9208H, Руководство пользователя

Страница: 25 / 50

24
input board channel [Y] D6.
DOG: Out Mode
AUTO[XXX]. Allocate output board channel to
AUTO mode (xxx=255,operate
all output) DOG:Out Mode AUTO
[XXX]. DOG:Out
ModeAUTO7
DOG:Out Mode
DVI[XXX]. Allocate output board channel to
DVI mode (xxx=255, operate all
output) DOG:Out Mode DVI
[XXX]. DOG:Out
ModeDVI7.
DOG:Out Mode
HDMI[xxx]. Allocate output board channel to
HDMI mode
（
xxx=255, operate
all output)
DOG:Out Mode HDMI
[xxx]. DOG:Out
ModeHDMI7
.
DOG:Deep On
[xxx]. Allocate output board channel to
open high color depth function
(xxx=255, operate all output) DOG:Deep On[xxx]. DOG:
DeepOn7.
DOG:Deep Off
[xxx]. Allocate output board channel to
close high color depth function
(xxx=255, operate all output) DOG:Deep Off[xxx]. DOG:
DeepOff7.
10. Network Interface Acquiescent Data
Matrix Network Port No: 5000
Matrix Network IP: 192.168.0.2
Matrix Network Gateway No: 192.168.0.1
Matrix Network Sub net Mask: 255.255.255.0
Matrix Network Hardware Add: 0x00.0x11.0x22.0x33.0x44.0x55;
PS: RST matrix system allocated network data just work.
11. Notice to switch serial ports, infrared data
◆
RS-232 & infrared operating are positive (positive: matrix input port connect RS-232
or infrared receiver side, output port connect RS-232 or infrared sending side).
◆
RS-232& infrared negative switch need the serial ports order (negative: matrix output
port connect RS-232 or infrared receiver side, output port connect RS-232 or infrared
sending side), the serial ports order please refer the serial ports specification.
◆
Infrared or serial ports switch (positive & negative) just can change from one channel
to another one or more, cannot all channels to one channel.