ITC TS-0622, Руководство пользователя

Страница: 8 / 11

8
4. system connection diagram
Connecting as above picture and turn on the conference host.
1) ID Setting
Turn on the conference host, and turn the SETID switch on the host to ON position. Then
begin setting the ID. Pressing ON/OFF button on TS-0622/TS-0622A, the mic lamp will flash
and then keep in red, which means the success of ID setting. After that, press ON/OFF button
and turn the SETID switch to OFF to turn off all the mic lamps.
2) Sign in before meeting – using the serial port line to connect the computer with the PC
interface of the conference host
Open the software in the PC and click Sign-in Control to the interface. Select the sign-in
mode at the left side and click Sign-in to the interface. Then press F2 key and move to bottom
left to view the shortcut menu, and select Sign-in item. The ON/OFF indicator on TS-0622/
TS-0622A will begin to flash. When pressing ON/OFF button on the mic, the indicator will be
on. But you could see there is some data change on both of the projector and the display of
the unit, which means the success of sign-in and you could go on sign-in the next unit. After
all the units are signed in, click sign-in finish.