ITC T-6707, Руководство пользователя

Страница: 7 / 12

5. OPERATION
Click Inquire
Diagram 1
Diagram 2
Diagram 3
Diagram 4
Diagram 5
Diagram 6
After click CONFIRM, change the connection mode to be network, write the same IP in address
bar as Diagram 5, click INQUIRE. After inquiry, then the window as diagram 6 appear. The
terminal configure is ok.
1. Connect the TERMINAL and computer's TERMINAL with serial port line or change to USB connector,
open All Program from Start in computer, find INTELLIGENT NETWORK BROADCAST then
choose TERMINAL CONFIGURE PROGRAM 2.36, run software program , open terminal configure
window 1, in serial port mode, click INQUIRY, then there will be window 2.
After inquire(whether configure terminal), confirm IP address correct or not, write the IP Address
(Eg.192.168.1.100), the window as diagram 3 appear. After confirm the IP address,click write,after
writing and confirm it is correct, then the window as diagram 4 appear (terminal configure wil get
the physical address MAC automatically).
5 5